Table of Contents
Advertisement
Changing the phantom power setting
Input 1/2 can provide phantom power of +12V, +24V or +48V.
1.
Press
.
2.
Use
to select "IN/OUT", and press
MULTI FILE mode
3.
Use
to select "In1/2
PHANTOM", and
press
.
4.
Use
to select an
item, and press
96
.
STEREO FILE mode
.
Turning "ON/OFF"
Use
to select an
input, and press
.
HINT
Select ALL to use phantom power on both inputs.
Use
to select "ON",
and press
.
Set the "VOLTAGE"
Use
to select the
voltage, and press
.
HINT
If a condenser mic can be used with less than +48V, lower-
ing the voltage will reduce the amount of power that the
uses.
Advertisement
Table of Contents
