Assembly Information (Non-Reusable Parts) - Kenwood NXR-1800 Service Manual

3.2.3 Forming of the fan motor wire
(1) Attach the fan motor to the chassis and insert its connector
into the CN3005 housing.
(2) Form the wire so as to pass through the two grooves of the
chassis.
Note:
Press the part around the arrow of the wire and form it
not to protrude from the groove of the chassis.
Groove
3.3

Assembly Information (Non-reusable parts)

When "Main Parts" is changed (ordered), "Non-reusable parts" should also be changed (ordered) together.
Especially the parts with adhesive such as Cushion and Sheet etc. cannot be reused.
Use new ones regardless of whether they have been used in locations that affect performance of the products.
Main Parts
Part Name Part Number
PANEL ASSY A6C-0154-10
LCD ASSY B3H-0149-00
LAN CONNECTOR E5J-0262-00
XCA-096E-00S
TX-RX UNIT
XCA-096E-01S
1-52 (No.RA094<Rev.002>)
3.2.4 Attaching the top plate
Note:
CN3005
Non-reusable parts
Part Name Part Number
FRONT GLASS B1A-0130-00
CAUTION STICKER B4B-0008-00
SHADE F1E-0071-00
CUSHION G1D-0419-00
MOUNTING J2B-0659-00
CONDUCT CUSHION G1D-0482-00
SHIELDING COVER F10-3225-05
SHIELDING COVER F1B-0021-00
CONDUCT CUSHION G1D-0482-00
CONDUCT CUSHION G13-2071-24
Make sure the fan motor wire fits in the grooves of the
chassis.
(1) Set the top plate on the chassis.
Attach the screws while pressing the top plate where the
cushion contacts.
Cushion
Remarks
FCC
QTY:2
LAN
E type only
Fan motor wire
Setting position