Bosch Blaze GLM165-40 Operating/Safety Instructions Manual page 71

Use of controls or adjustments
or performance of procedures
other than those specified
in this manual, may result in
hazardous radiation exposure.
The use of optical instruments
with this product will increase
eye hazard.
ALWAYS: Make sure that any
bystanders in the vicinity of use
are made aware of the dangers
of looking directly into the
measuring tool.
DO NOT remove or deface
any warning or caution labels.
Removing labels increases
the risk of exposure to laser
radiation.
DO NOT stare directly at the
laser beam or project the laser
beam directly into the eyes of
others. Serious eye injury could
result.
DO NOT place the measuring
tool in a position that may
cause anyone to stare into
the laser beam intentionally
or unintentionally. Serious eye
injury could result.
DO NOT use any optical tools
such as, but not limited to,
telescopes or transits to view
the laser beam. Serious eye
injury could result.
ALWAYS remove the batteries
when cleaning the laser light
aperture to laser lens.
DO NOT operate the measuring
tool around
allow children to operate the
children or
measuring tool. Serious eye
injury could result.
ALWAYS turn the measuring
tool "OFF" when not in use.
Leaving the measuring tool "ON"
increases the risk of someone
inadvertently staring into the laser
beam.
DO NOT operate the measuring
tool in combustible areas such
as in the presence of flammable
liquids, gases or dust.
ALWAYS
measuring
Damage to the measuring tool
and/or serious injury to the user
could result if the measuring tool
falls.
ALWAYS
accessories
recommended
manufacturer of your measuring
tool. Use of accessories that
have been designed for use with
other measuring tools could result
in serious injury.
DO NOT leave measuring tool
"on" unattended in any operation
mode.
Repair and servicing must
always be performed by a
qualified repair facility. Repairs
performed
personnel could result in serious
injury.
DO NOT use this measuring
tool for any purpose other than
those outlined in this manual.
This could result in serious injury.
DO NOT disassemble the
-6-
position
tool securely.
use only
that
by
by unqualified
the
the
are
the