Technics QUARTZ SA-GX100 Service Manual page 11

Ref. No.
12
Procedure 1. Unsoider the power IC or regulator
1-11-12 transistor.
2. Remove the 4 screws (O~@).
Power !C
Regulator Transistor
eWhen mounting the power IC or regulator transistor,
. apply silion thermal compound (SZZ0L15 or
equivalent) to the rear of the power IC or regulator
transistor. .
nee
Removal of the power supply P.C.B.
Procedure
1-2-—14
1. Remove the 1 flat cable (CN604).
2. Remove the 2 screws (@, @).
3. Remove the power supply P.C.B. in the direction of
the arrow.
Cy wep aren
- | Removal of the power IC and Ref. No. Removal of the AC IN TERMINAL
regulator transistor 13 P.C.B.
Procedure
1-9 +13
Claw
,
2
a
>
er
Shield Plate
1. Remove the 2 screws (@, @).
2. Remove the shield plate.
3. Release the 2 claws.
Procedure
1—2— 14-15
Power Transformer
1. Remove the 1 flat cable (CN701).
2. Remove the 4 screws (Q~®).