Samsung PL50P5HX/STR Service Manual page 20

Disassembly & Reassembly
12-1-9 Separation of ASSY SMPS and ASSY SMPS DC-DC
Part Name
SMPS
① Remove 8 screws.
: PH,+,WWP,M3,L8,NI PLT
② Detach all connectors from the ASSY SMPS then remove the
boards.
SMPS DC-
③ Remove 4 screws.
DC
: PH,+,WWP,M3,L8,NI PLT
④ Detach all connectors from the ASSY SMPS DC DC then
remove the board.
: Wear gloves when handling the power board as there may
be some remaining electrical charge in the capacitor.
Specifically, avoid touching any part of the capacitor.
12-1-10 Separation of ASSY LOGIC BOARD
Part Name
Flat Cable ① Take care when separating the Logic Board not to damage
the Flat-Cable Connector Cover.
Logic Board ① Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
② Remove the Logic Board.
12-4
Description
Description
Description Photo
Description Photo
Samsung Electronics