Clearing Positions; Focus Controls; Iris Controls; Additional Setup Options - X10 VANGUARD VK77A Owner's Manual

Remote Control Features
Clearing Stored Positions
You can delete all stored positions. Here's how:
1. Press and release C1.
2. Press and hold Setup until the C1 button lights green.
3. Press Center.
4. Press Setup again.

Focus Controls

In addition to the auto focus feature, you can control the focus of the
camera manually. Press the focus buttons, Up or Down, to adjust the focus.
Use this feature to improve the picture after auto focus, or to adjust the
focus of a specific object in the camera's view.

Iris Controls

The camera's iris controls the amount of light that enters the lens. The
camera automatically adjusts the iris when it focuses so that it has the right
amount of light for your subject. If you want to brighten the picture, press
the Iris Up button to open the iris wider and let more light in. To limit the
amount of light in the picture, press Iris Down to close the iris more.
16
A S
DDITIONAL

Mounting the Camera

You can install the Vanguard Camera using the supplied mounting bracket.
To install the bracket, use the supplied screws to attach it securely to a wall
or ceiling. Then, line up the hole on the bottom of the camera to the mount
on the bracket and turn the screw until the camera is tightly fastened to the
bracket.
Warning! The camera and power supply is intended for indoor use only.
Do not install them outdoors.
17
O
ETUP PTIONS