1.
Auto zero
Calibration
successful
150(150)
You can calibrate the slope for power PODs that use Crank Torque
Frequency (CTF).
To calibrate the slope:
1. After the power POD calibration is complete, press [Start Stop].
2. Set the correct value according to your power POD manual with
[Light Lock] and accept with [Next].
3. Wait until the setting is completed.
4. Repeat procedure if setting fails or power POD is lost.
1.
Slope
Calibration
successful
150(150)
66
2.
Auto zero
ON
2.
Slope
10.0 Nm/Hz
3.
Auto zero
setting...
3.
Setting
slope...