KTM 150 EXC 2023 Setup Instructions page 16

2 SETUP
14
–
Join the plug-in connectors of tail light
cable harness
Info
Pay attention to routing of the wiring harnesses.
–
Install the rear left side cover. (
–
Install the air filter box cover. (
–
Install the 12-V battery. (
S03686-10
–
Position the right footrest and pin.
Info
Only insert the pin to the extent that the spring can still
be mounted.
R01229-10
–
Position spring as shown.
B
Spring
S03690-10
–
Press the spring with special tool
Footrest spring plier (79029083000)
The special tool is applied to area
–
cm
Mount pin
S03691-10
ck
with the wiring harness.
p. 28)
p. 27)
p. 25)
C
engages in area .
cl
.
D
on the footrest.
.
bt
and turn signal