Table of Contents
Advertisement
●
BL. LEN. (block length):
●
FRAME:
●
PRINT (print order):
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL1 Label Type mode.
☞ By using the Numbering function with the PANEL1 Label Type mode, a single label
containing multiple blocks of ascending characters can easily be created, for example,
to label patch panels as shown above. (For details on the Numbering function, refer to
Printing multiple copies with incremental characters
Panel2 Mode
Specifying a fixed length for each block makes
this label useful for a row of switches (for
example, in a switchboard) or a patch panel. In
addition, the text blocks can be printed in the
order that they were typed in or in the opposite
order, or the text can be printed rotated 90°.
Panel2
14
* For the PORT Label Type mode:
20.0 to 200.0 mm
Default: 30.0 mm
* For the PANEL1 Label Type mode:
6.0 to 200.0 mm
Default: 30.0 mm
* For the PORT Label Type mode:
OFF, 1
Default: OFF
* For the PANEL1 Label Type mode:
OFF, 1
4
7
Default: OFF
IN ORDER, REVERSE
Default: IN ORDER
Block 1
Block length
(Length × Multiple)
(Length × Multiple)
, 2
, 2
, 5
, 6
, 8
, 9
on page 33.)
Block 2
Block length
(Length × Multiple)
, 3
, 4
, 3
,
,
Block 3
Block length
Advertisement
Table of Contents
