Technical Features - APRILIA AHC 5010 User Manual

Hair clipper set

Hide thumbs

Table Of Contents

Table of Contents

Available languages

HOW TO GIVE A HAIRCUT

1. Start at the back of the head. Holding the clipper,lightly stroke upwards making

sure you are taking off the desired amount of hair. Work your way up to the crown

of the head in layers. When completed, come the area to remove any loose hair and

determine If you need any further cutting.

2. Repeat the same procedure for each side of the head. Make sure the length of

the hair is trimmed the same on both sides of the head

3. To cut the top of the head, hold the hair between your fingers and cut a small

amount at a time.

4. To trim around the ears and short hairs at the nape of the neck, you must remove

the trimming guide. Angle the clipper and lightly stoke around each ear to the back of

the neck. Be careful not to touch ears to press too hard

5. The adjustable tape level allows you to gradually change the closeness of the cut,

either with or without a trimming guide. When the lever is fully forward the blades

will give the closest cut. Moving the lever gradually backwards increases the cutting

length.

STORAGE

When not in use, unplug it and store out of reach of the children in a safe, dry

location. Never wrap the cord around the appliance this will cause the cord to wear

prematurely and break. Handle the cord carefully for long life, and aovid jerking,

twisting or straining especially at plug connections.

This product is not suitable to use in a bath or shower.

Cleaning of the hair clipper

·Turn off the hair clippper and unplug it.

·Clean the blades from the cut hair, using the cleaning brush supplied with the set.

·Wipe the unit and the accessories with a damp cloth and then wipe them dry with

a soft cloth.

·Never immerse the unit into water or any other liquids.

·Do not use abrasive materials or cleaners.

·Lubricate the blades with oil.

·Keep the unit in a cool dry place out of reach of children.