Panasonic SC-PT760 Operating Instructions Manual page 11

Digital
transmitter connection
Digital transmitter
/" Insert fully until you hear a click.
Main unit
AC cord connections
Wireless system
Main unit
AC power supply cord
:j/ (included)
To household
AC outlet
(AC 120 V, 60 Hz)
AC power supply cord
:_-- (included)
To household
AC outlet
(AC 120V, 60 Hz)
Conserving power
The main unit and the wireless system consume a small amount of
power when they are turned off (main unit: approx. 0.3 W, wireless
system: approx. 0.2 W). To save power when they are not to be used for
a long time, unplug them from the household AC outlet.
You will need to reset some memory items after plugging in the main unit.
The included AC power supply cords are for use with the main unit and
wireless system only. Do not use them with other equipment, Also, do
not use cords for other equipment with the main unit or wireless system,
Preparing the remote control
• Batteries
Insert so the poles (+ and ) match those in the remote control.
R6/LR6, At
Replace the cover.
Press in and lift up.
Do not:
• mix old and new batteries.
• use different types at the same time,
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control,
Remove the batteries if the remote control is net going to be used for a
long period of time. Store in a cool, dark place.
• Use
Aim at the remote control signal sensor (4 15), avoiding obstacles,
at a maximum range of 7.0 m (23 ft) directly in front of the unit,
i CAUTION i
Danger of explosion if battery is incorrectly replaced, Replace only i
with the same or equivalent type recommended by the manufacturer, i
Dispose of used batteries according to the manufacturer's instructions, i
• De net heat or expose to flame.
• Do net leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.