Advertisement
2. Installation
2.1 Technical characteristics
Water supply pressure
Water supply temperature
Capacity
Class of protection against
moisture
Protection against electric
shock
Electrical data
2.1 General Information
This appliance may be placed up against walls or
other furniture units.
If the appliance is installed near a heat source, fit a
special insulating panel to prevent overheating and
malfunction of the appliance.
To facilitate the installation procedure, the intake and
drain hoses can be positioned in any direction; make
sure that the hoses are not kinked, crushed or pulled
too tightly.
Warnings
Appliance dimensions (mm)
min. 0,05 - max. 0,9 MPa (min. 0.5
– max. 9 bar)
max. 60°C
12-13 standard place settings
IPX0
class I
see the data plate
9
Advertisement
