Push the water drain hose as far
3.
as it will go into the connecting
piece.
Empty the condensation container.
4.
→ "Emptying the condensation
container", Page 31
Remove the stopper from the un-
5.
derside
and insert it in the re-
cess in the top
Insert the condensation container.
6.
→ "Inserting the condensation con-
tainer", Page 32
Connect the appliance to the water
7.
outlet.
→ "Water outlet connection types",
Page 15
Tip: To collect condensation in the
condensation container again (e.g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
.
Installation and connection en
Water outlet connection types
ATTENTION!
In the event of a blocked or covered
outlet, accumulated wastewater can
flow back into the appliance.
Before operating the appliance, en-
▶
sure that the wastewater drains
away quickly and eliminate any
blockages.
Drainage into a
siphon.
Drainage into a
wash basin.
Drainage into a
gully.
Secure the con-
nection point with
a (12-22 mm)
hose clamp.
Secure the water
outlet hose with
a hose guide at
a height of at
least 80 cm and
no more than
100 cm.
Note: You can
use the Y-distrib-
utor → Page 27
to connect the
water drain hose
of an additional
appliance, such
as a washing
machine, to the
same siphon out-
let.
Push the water
drain hose fully
through the el-
bow and secure
it using fixing ma-
terial.
Secure the elbow
at a height of no
more than 100
cm.
Push the water
drain hose fully
through the el-
15