Wolf CT15I/S Use & Care Information Manual page 15

W O L F I N D U C T I O N C O O K TO P
H OT- S U R FAC E I N D I C A T O R
As a safety precaution, a hot-surface indicator
light will illuminate when the surface
temperature of any one of the induction
elements rises above 150˚F (65˚C). "HOT" will
illuminate in the control panel. It will remain
illuminated until the entire surface temperature
has decreased to a safe level. Even if the
cooktop controls are turned off, you are alerted
that an area of the cooktop remains hot.
Hot-surface
indicator light
Hot-surface indicator light
Dimensions in parentheses are in
millimeters unless otherwise specified.
U S E & C A R E
I N I T I A L S TA RT- U P
Before operating the induction cooktop, please
read the entire Use & Care Information.
Clean the cooktop surface as outlined in the
Ceramic Glass Top cleaning section on page
20. The cooktop surface must be free of any
foreign substance, especially those that could
melt and permanently adhere to the glass.
During the first uses of your new induction
cooktop, you may smell a slight burning odor
or see light smoke. Both of these conditions
are normal in new ceramic glass cooktops.
A sound may be detected when the cooktop
begins operation. This is normal.
IMPORTANT NOTE: When the cooktop is
powered up for the first time, the unit will
default to Lock mode. To unlock the control
panel, refer to the Lock Mode section on
page 13.
Make sure that the cooktop surface is
clean and dry before operating.
Do not place hot cooking utensils directly
over control panel.
15