Sony STR-GX9O0ES Operating Instructions Manual page 23

5 Set the video recording source to be ready
for playback.
Insert a blank video tape into the recording
Vcr.
Start recording on the recording VCR and
then start playing the both video and audio
recording source.
Note on the FUNCTION MODE button
If you do not select the video or audio within 8 seconds after
pressing the FUNCTION MODE button, the VISUAL MODE
or AUDIO MODE is canceled and you cannot fix the video
or audio. In this case, press the FUNCTION MODE button
until the mode that you want appears on the display. Each
time you press the button, the mode changes as follows:
VISUAL MODE = AUDIO MODE => off.
To record other audio on a desired part of video
1 Play back the video recording source and press the pause
button on it at the point where vou want to record other
audio.
Press FUNCTION MODE twice and select the audio with
the FUNCTION knob or TAPE button.
3 Start recording on the recording VCR, release the pause
mode and start playing the recording source for audio.
ie)
23