Using The Remote Control - Sony STR-GX9O0ES Operating Instructions Manual

Using the Remote Control
The remote lets you operate the connected components as
well as the receiver. Press one of the SYSTEM CONTROL/
FUNCTION buttons first to select the program source, then
use the following buttons to operate each component.
The SYSTEM CONTROL/FUNCTION buttons are factory
set as described in the following list.
FUNCTION button Operates
Tuner
Tape deck
DAT deck/MD recorder
CD player
DAT/MD
CD is
LD
VIDEO 1
LD player
VCR (VTR 1 mode)
VCR (VTR 2 mode)
VCR (VTR 3 mode)
TV
(The receiver enters PHONO mode)
You can use the RMS function of Sony cassette decks with
this remote. For more information on the availability of
Sony stereo cassette decks with RMS capability, contact your
nearest Sony dealer.
Turning on power of each component
1 SYSTEM OFF
Ry
aS EE ee
~
<
a
e)
2a
=| za
° -
>> © — VISUAL POWER
ON *_ TV/VIDEO
1 Press one of the SYSTEM CONTROL/FUNCTION
buttons.
The receiver, the audio component connected to the
AC OUTLET of the receiver, VCR, LDP and TV are
turned on.
2 Press the button for the function you want
to use.
The function of the buttons changes depending on
which component you are operating.
Turning off the power of components
* Pressing the SYSTEM OFF button turns off the power of all
components at one time.
* Pressing the VISUAL POWER button turns off only the
TV, VCRs and LD player.
* If you want to turn off the power while listening to a
program source, see "Background operation" on page 15.
If you use Sony TVs ;
e When you press the VIDEO 1, 2, 3 or LD button, the TV
automatically turns on and switches to appropriate VIDEO
input.
¢ When you press the TV button, the TV turns on and
switches to the TV reception mode. (If the TV does not
switch to the TV reception mode, hold down the button
until the TV is turned on or press the button again after the
TV is turned on.)
If the TV input does not switch to the appropriate mode,
switch the input signal with the TV/ VIDEO button.
Some Sony TVs cannot be turned on with the remote
suppiied with this unit. In this case, use the remote
supplied with the TV to turn it on.
If you use TV most of the time (Only for Sony TVs)
You can set the remote to operate only the TV. Press the TV
CONTROL ON button. This sets up the remote so that it
works only with your TV.
13