Table of Contents
Advertisement
Explanation of Signs and Symbols
Symbols used on the equipment and on the packaging
Caution, consult accompanying
documents
This symbol indicates that the waste of
electrical and electronic equipment must
not be disposed as unsorted municipal
waste and must be collected separately.
Please contact an authorized
representative of the manufacturer for
information concerning the
decommissioning of your equipment.
Type BF applied part
(defibrillation-proof)
Catalogue number
Serial number
CE marking
CE marked per the Medical Device
0482
Directive 93/42/EEC of the European
Union. The notified body is MEDCERT
GmbH.
Gossudarstwenny Standart Russia
(GOST)
In the USA, the product is only for use by
or on the order of a physician, or persons
licensed by U.S. law.
USB port, connection to PC
Serial port, connection to PC
Polarity of the DC input (charger only)
Approval mark for use of the equipment
in a vehicle (charger only, xxx-xx xxxx
alphanumeric characters)
Class II equipment
For indoor use only
2001589-085 Revision G
Controls and Indicators
Symbols used on the display
M
Further relevant symbols used on the battery charger
TR15RA120
100-240V 0.4A
47-63Hz
12V 1.1A
TONOPORT V
For indoor use only
Manufacturer's identification
Date of manufacture.
The number found under this symbol is
the date of manufacture in the YYYY-
MM format.
Calibration mark, valid in Germany only
(see section "Technical Inspections of the
Measuring System" in chapter 8)
blinks with each detected oscillation; is
continuously lit when the monitor contains
data
blinks when the batteries are almost
depleted; is continuously displayed when
batteries are discharged and no more BP
measurements can be taken
day phase selected
night phase selected
Power supply type designation and
ratings
UL-certified product
Approval mark for Japan
Pollution control symbol according
to the Chinese standard SJ/T11363-
2006
11
Advertisement
Table of Contents
