Operation - Husqvarna 330iK Operator's Manual

4. Tighten the knob fully.
To disassemble the two-piece shaft
1. Turn the knob 3 turns or more to loosen
the coupling.
Introduction
WARNING:
understand the safety chapter
before you use the product.
To connect the battery to the product
WARNING:
original batteries with the product.
1. Make sure that the battery is fully charged.
12

Operation

Read and
Only use Husqvarna
2. Push and hold the button (C).
3. Hold tight to the end of the shaft that the
motor is attached to.
4. Pull the attachment straight out of the
coupling.
C
2. Push the battery into the battery holder of
the product. The battery locks into position
when you hear a click.
CAUTION:
does not move easily into the
battery holder, the battery is
not installed correctly. This can
cause damage to the product.
3. Make sure that the battery is installed
correctly.
Work position
• Hold the product with 2 hands.
If the battery
2094 - 001 - 04.08.2023