Table of Contents
Advertisement
Framed Panels
Framed Panels.
If the thickness of the custom panels
1
is less than
/
" (6), they must be backed up with a sheet
4
of shim material to build the total thickness to
1
the panel is thicker than
/
" (6), a routed edge must be
4
provided around the panel to ensure a proper fit. Refer to
the illustrations.
IMPORTANT NOTE: On all framed models, routing,
recessing or optional extended handles may be required
on raised panels for finger clearance under the handle.
Refer to the full-scale templates at the end of this guide.
IMPORTANT NOTE: On glass door models, the edges of
the window cut-out will need to be finished, as they will
be exposed.
IMPORTANT NOTE: When installing two units in a side by
side application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
Do not exceed the framed decorative panel dimen-
sions. Exceeding dimensions could cause damage
to the panels and the Sub-Zero unit.
TRIM
1
/
" (6). If
REVEAL
4
1
/
"
4
(6) min
1
/
"
4
(6)
PANEL
1
Panels
/
" (6) thick or less.
4
subzerotrade.com
MAIN FRAME
TRIM
REVEAL
1
/
"
4
(6) min
ROUT TO
1
/
"
DOOR
4
(6)
Panels thicker than
13
MAIN FRAME
DOOR
1
/
" (6).
4
Advertisement
Table of Contents
