With A Vcr - No Cable Box - Panasonic CT-275F35 Operating Instructions Manual

PICTURE In PICTURE (PIP) OPERATION (CONT.)
Picture In Picture (PIP) Operation (Cont.)
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Connect your television to a VCR, as shown.
TERMINALS ON BACK OF TV
Cable
INPUT
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the supplied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
ati mn To view an external video source in the PIP frame:
va m + Press the TV/VIDEO button on the Remote Control to select the same video
g 5 input which your VCR is connected to.
amot > GH RECALL . Verify the VCR is on.
Coes tar von pas cus: e Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
° Choose channels for the PIP frame by pressing the TV button on the Remote
Control and using the PIP Channel up/down buttons
SWAP and RECALL Buttons
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.