Table of Contents
Advertisement
ASSEMBLY
ASSEMBLY
This instructionbook is for several models. Some parts or ecossso-
rias are not included on all models. Read and follow the assembly
and adjustment instructions for your mower. Allfasteners are in the
parts bag. Do not discard any parts or material until the unit is
assembled.
_IL
WARNING: Before doing any assembly or mainte-
nance to the mower, remove the wire from the spark
plug.
NOTE: in this Instruction book, left and dght describe the loca-
tion of a part with the operator on the seat.
PARTS BAG - CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown full size. The quantity is shown in brackets ().
710226
71_P-25
(2) CarriageBolt
(2) WingNut
94160
(2) Knob
71(_57
(2) Washer
710119
(8) W_her
_7350
(1) Keys & Ring
O
710119
(4) Locking Ring
CHECK THE TIRES
Check the air pressure in the tires. Tires with too much air pressure
will cause the unit to ride rough. Also, the wrong air pressure will
keep the mower housing from cutting level, The correct air pressure
(PSI) is 14 PSI (1 BAR). The tires were over inflated for shipment.
CHECKTHE
LEVEL OFTHE MOWER HOUSING
Make sure the level of cut is still correct, After you mow a short
distance, look at the area that was cut. If the mower housing does
not cut level, see the instructions on "How To Level The Mower
Housing" in the Maintenance section of this instruction book,
710933
9
Advertisement
Table of Contents
