Ai"Rachments; How To Use The Throtn.econtrol; How To Usethe Blade Rotationcontrol - YARD KING PERFORMANCE 50562X89 Assembly, Operation And Maintenance

Table of Contents

Advertisement

OPERATION
ATTACHMENTS
HOW TO USETHE BLADE ROTATIONCONTROL
This unit can use many ditfemnt attachments. See the attachment
page in this book. This unit can pull attachments
like a lawn
sweeper, a lawn aerator, or a hopper spreader. This unitcan notuse
attachments that engage the ground like a plow, a disk harrow, or
a cultivator.
HOW TO USE THE THROTTLE
CONTROL
The blade rotation control is next to tho steering wheel (Figure 8).
Use the blade rotation control to engage the blade(s) or to operate
• snow thrower attachment.
1.
Before you start the engine, make sure the blade rotation con-
trol is in the DISENGAGE poattlon•
Use the throttle €_)ntrol to increase or decrease the speed of the
engine.
CAUTION: Always operate the engine with the throttle control
In the FAST posiflon. If the engine mrle for several minutes st
slower than the FAST position, the engine end transmission
will overheat end ran be damaged.
1.
The FAST praition is marked with a detent. For normal opera-
tion and when using a grass bagger, move the throttle control
to the FAST position. For maximum charging of the battery end
for a cooler running engine end transmission, operate the en-
gine in the FAST position.
2.
3,
For transport end to tow pull behind attachments, control the
ground speed with the speed control pedal.
The engine governor is set at the factory for maximum perform-
ance. Do not edjt._t the governor to increase the speed of the
engine.
2.
Move the blade rotation control to the ENGAGE position to
rotate the blade(s).
Nots: If the engine stops when you engage the blade(s),
the seat switch Is not activated. Make sure you sit In the
middle of the seat. Also, make sure the wire Is connected
to the seat switch.
3.
Move the blade rotation control to the DISENGAGE position
to stop the blade(s). Before you leave the operator's position,
make sure the blade(s) has stopped rotating,
4.
Before you ride the unit across a sidewalk or a road, move the
blade rotation control to the DISENGAGE position.
_1
WARNING: Always keep your hands and feet away
from the blade, deflector opening, and the mower
housing when the engine runs.
Disengage
Position
B_ade R_=ionCo_rol
Engage Pc_s_ion
Figure 8
7109,33
14

Advertisement

Table of Contents
loading

Related Products for YARD KING PERFORMANCE 50562X89

Table of Contents