LG WD-3274RHD Owner's Manual page 7

• Electrical connection
1. Do not usean extensioncord or double adapter.
2. If the supply cord is damaged,it must be replacedby the manufactureror its serviceagents
or similarlyqualifiedperson in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connectthe machine to an earthed socket in accordancewith currentwiring regulations.
5. The appliancemust be positionedso that the plug is easily accessible.
• Repairs to the washing machine must only be carriedout qualified personnel.Repairs carriedout by
inexperiencedpersons may cause injury or serious malfunctioning.Contactyour localservice center
• Do not install your washingmachine in rooms where temperaturesbelowfreezing may occur. Frozen
hoses may burst under pressure.The reliability of the electroniccontrol unit may be impairedat
temperaturesbelowfreezing point.
• If the appliance is deliveredin the winter months and temperaturesare belowfreezing : Store the
washing machineat roomtemperaturefor a few hoursbefore putting it intooperation.
• Washing Machine is to be connected to the water mains using new hoses
Old hoses should not be used.
• Connecting water supply hose
Hot wate_
Cold
4.5 ~ 145 PSI (30~1000 kPa)
• Don't strip or crossthread when connecting
inlet hose to the valve.
• 1/the water supplypressure is more than
1000 kPa, a pressure reducer device should
be installed.
•Two Sealing washer are suppliedwith the
water inlet hoses to preventwater leaks,
• Checkwater tightness of washing
machineconnectionsby turningthe tap
completelyon.
• Periodicallycheckthe conditionof the
hoseand replacethe hose if necessary.
• Make sure that there is no kink in the
hoseand that it is not crushed.
•The Inlet hose which hasred connectoris
for the hot water tap.
• Hot and cold water faucets Must be
installedof your washer'swater inlet.