Power Front Seat Adjustment - Audi Q7 2015 Owner's Manual

M
"'
0
_,
"".
rl
I.O
"'
rl
"'
rl
Front passenger's seat
Always move the front passenger seat into
the rearmost position .
To avoid contact with the airbag while it is de-
ploying, do not sit any closer t o the instru-
ment panel than necessary and always wear
the three-point safety belt provided adjusted
correctly . We recommend that you adjust the
passenger's seat in the following manner:
.. Move the front passenger seat into the rear -
most position of the fore and aft adjustment
range ~ .&. in Why is your seat adjustment
so important? on page 74.
• Bring the backrest up to an (almost) upr ight
position. Do not ride with the seat reclined.
.. Adjust the head restraint so the upper edge
is as even as possible with the top of your
head . If that is not possible, try to adjust
the head restraint so that it is as close to
th is position as possible ¢ page 79 .
.. Place your feet on the floor in front of the
passenger's seat .
Power front seat
adjustment
Seat adjustment controls
The operating logic for the switches corre-
sponds to the cons truction and function of
the seat.
ui
"'
~
-"
__.___,., 1 ,--~--,-,:,
Fig.
77 Front seat: Contr ols for seat adjustment
The switches to adjust the sea t cushion and
the seatback correspond to the layout, the de -
sign and the function of the seat. The seats
are adjusted by moving the switches following
this logic.
Seats and storage 75
Controls
@ Seat adjustment
®
Seatback adjustment
© Lumbar support
Adjusting the seat
Position, angle and shape of the seat can be
adjusted electrically to ensure safe and com-
fortable seating .
Read and follow the warning notices ¢ .&. be-
fore you adjust your seat .
Fore-and-aft adjustment
.. Push the switch @ forward or backward
¢
page 75, fig. 77 .
Adjusting seat height
.. Pull or push the switch @ up or down.
Front seat cushion up/ down
.. Press the switch @ at the front up or down .
Rear seat cushion up/ down
.. Press the switch @ at the rear up or down.
Adjusting seatback angle
.. Push the switch @ forward or backward.
Adjusting the curvature of the lumbar
support
.. Push the switch plat e © forward or back-
ward to increase or reduce the curvature .
Adjusting the height of the lumbar
support
.. Push the switch plat e © up or down to posi-
tion the curvature higher or lower .
A
WARNING
-Adjust the driver's seat only when the ve-
hicle is stationary. You risk an accident
otherwise.
- The power adj ustment for the front seats
also works with the ignition switched off
or with the ignition key removed. For this
reason, children should never be left
IJIJ>