Technics SL-PG480A Operating Instructions Manual page 15

Records a CD using the Peak Search
Function
This function searches for the peak level on a disc.
This is convenient to adjust the recording level on the cassette deck
when recording.
Pa 2 2
1 Prepare the cassette deck.
1. Wind the leader and insert the tape.
2. Select noise reduction.
3. (Double-side playback deck only)
Set the reverse mode to single side
playback (1), and set the running
direction of the tape to P.
4. Set the cassette deck to recording
standby mode.
(For details, refer to the operating in-
structions for the cassette deck.)
2 Gaetan Press PEAK SEARCH to
search for the peak level on
the disc, and adjust the re-
cording level on the cassette
deck.
Searching for the peak level takes about 2 minutes and 30 seconds
for a 60 minute CD. When the peak level is found, the unit repeatedly
produces the sound for about 6 seconds around the peak level.
Hluminates.
llluminates.
Regarding the recording level adjustment procedure, refer to the
operating instructions for the cassette deck.
—m ar
aa
Press > at the same time you
begin recording on the cas-
sette deck.
The first song recorded on side B and the
recording of the cassette deck start at the
same time when recording side B.
To stop recording:
EU Press B.
For vour reference:
Peak level:
Since multiple peaks exist on compact discs, even for the same disc
a different peak level mav be found each time a peak search is
performed.
To operate the PEAK SEARCH function during program re-
cording: ;
1. Perform step 1 described above.
2. Perform steps 1-4 on page 10.
3. Perform steps 2-4 described above.
15