Sony Handycam DCR-SR42 Operating Manual page 10

Power supply
You can use yotlr Call,corder ill _uly COUlltl'le_/
regions using tile AC Adaptor supplied with your
c+unColder within tile A< +"100 V to 240 V, 50/(,0 Hz
l'+lng+.
Use a commercially available AC plug adaptor [a],
if necessary, depending on the design of the wall
outlet [b],
I
AC-L200/L200B [a] [b]
• When tile lithium battery becomes weak, lhe
operating distance of the Relnote Comtmmder
may shorten, or the Renlote ('olnnlander may nol
function properly. In this case, replace the batlery
with a Sony CR2025 lilhium ballery. Use of
another battely may presenl a risk of fire or
explosion.
Usingthe Remote Commander for the
first time
Remove the insulationsheet before usingthe
Remote Commander.
To changethe battery of the Remote
Commander
(_) While pressing on the tab, inset .,,our
fingernail into the slit to pull out the battery
case.
(_) Place a new batte U with the + side l]Jcing up.
(_) Insert the battery case back into the Remote
Commander until it clicks.
Bailer/may ex I 1( de if mistrealed. Dcnt l
recharge, disassemble or dispose of in fire. I
10