Sony RDR-GX7 Operating Instructions Manual page 20

O Connecting to your TV
This connection will use your TV's speakers for sound.
DVD recorder
to LINE OUT (R-AUDIO*L) 1 or 2
91_ Connecting to a stereo amplifier
(receiver) and 2 speakerslConnecting
to an MD deck or DATdeck
If your stereo amplifier (receiver) only has audio input jacks L
and R, use I_. if your amplifier (receiver) has a digital input
jack, or when connecting to an MD deck or DAT deck, use t_.
In this case, you can also connect the recorder directly to the MD
deck or DAT deck without using your stereo amplifier
(receiver).
DVD recorder
TV
(yellow)* (yellow) INPUT
VIDEO
, I I ,
(whtte) \ _ok / (wNte)
Audio/video cord
(supplied)
1"7_),;',*,_: Signal flow
* The yellow plug is used for video signals (page 18 2.
"_" Hint
When connecting to a monaural TV, use a stereo-mono conversion cord
(not supplied).
Connect tile LINE OUI" (R-AUDIO-L) 1/2 jacks to the
TV's audio input jack.
Do not connect the LINE IN (AUDIO L/R)jacks to your TV's audio
output jacks at the same time.
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord _--.
(not supplied)
to coaxial or optical
digital input
[Speakers]
Stereo amplifier (receiver)
Front (L)
MD decldDAT deck
Front(R)
[ECI_>_ : Signal flow
"_ Hint
For connection I_, you can use the supplied audio/video cord instead
of using a separate stereo audio cord.
20
Step 4: Connecting the Audio Cords