Table of Contents
Advertisement
The recordings will be named in the following format:
Channel Name_Date(Year/Month/Day)_Programme
Name.
Timeshift Recording
In order to use timeshift recording feature the Time
Shift Mode option in the Record>Time Shift Mode
menu should be enabled first.
In timeshifting mode, the programme is paused
and simultaneously recorded to the connected USB
storage device. Press the Pause/Play button while
watching a broadcast to activate timeshifting mode.
Press the Pause/Play button again to resume the
paused programme from where you stopped. Press
the Stop button to stop timeshift recording and return
to the live broadcast.
When this feature is used for the first time Disk Setup
wizard will be displayed when the Pause/Play button is
pressed. You can either choose Auto or Manual setup
mode. In Manual mode, if you prefer, you can format
your USB storage device and specify the storage space
that will be used for timeshift function. When the setup
is complete, the Disk Setup Result will be displayed.
Press the Back/Return button to exit.
Timeshift function will not be available for radio
broadcasts.
Disk Format
When using a new USB storage device, it is recom-
mended that you first format it using the Format option
in the Record>Device Info menu in Live TV mode.
Highlight the connected device on the Device Info
screen and press OK or the Right directional button
to see the list of available options. Then highlight
Format and press OK to proceed. A confirmation
dialogue will be displayed. Highlight Yes and press
OK to start formatting.
IMPORTANT: Formatting your USB storage device
will erase ALL the data on it and its file system will be
converted to FAT32. In most cases operation errors will
be fixed after a format but you will lose ALL your data.
Schedule List
You can add reminders or record timers using the
Schedule List menu. You can access the Schedule
List from the Record menu in Live TV mode. Highlight
Schedule List and press OK. Previously set timers will
be listed if any available. Otherwise, a dialogue will be
displayed. Highlight Add and press OK to add a timer.
Press the Yellow button to add a timer while the
Schedule List menu is displayed on the screen. You
can define the type of the timer by setting the Schedule
Type option as Reminder or Record. When other
parameters are set press the Green button. The timer
will be added to the list.
If any available, you can also edit or delete the timers
on this list. Highlight the timer of your choice and press
the Red button to edit. After you edited the timer press
the Green button to save changes. Highlight the timer
of your choice and press the Blue button to delete.
When you choose to delete a timer a confirmation
dialogue will be displayed on the screen. Highlight Yes
and press OK to delete the selected timer.
A warning message will be displayed asking whether
you want to replace timers, if the time intervals of two
timers overlap. You can not set more than one timer
for the same time interval. To replace the old timer with
the new one, highlight Yes and press OK. Highlight No
and press OK to edit the last created timer.
Press the EXIT button to close the Schedule List.
CEC
With CEC function of your TV you can operate a
connected device with the TV remote control. This
function uses HDMI CEC (Consumer Electronics
Control) to communicate with the connected devices.
Devices must support HDMI CEC and must be
connected with an HDMI connection.
In order to make use of the CEC functionality the
related option in the menu should be switched on.
To check, switch on or off the CEC function, do the
following:
• Enter the Settings>Channels & Inputs>Inputs
menu on the Dashboard or the TV options>Set-
tings>Channels & Inputs>Inputs menu in Live
TV mode.
• Scroll down to the Consumer Electronic Control
(CEC) section. Check if the HDMI control option is
switched on.
• Highlight the HDMI control option and press OK to
switch on or off.
Make sure that all CEC settings are properly set up
on the connected CEC device. The CEC functionality
has different names on different brands. CEC function
might not work with all devices. If you connect a device
with HDMI CEC support to your TV, the related HDMI
input source will be renamed with the connected
device's name.
To operate the connected CEC device, select the
related HDMI input source from the Inputs menu on
the Dashboard. Or press the Source button if the TV
is in Live TV mode and select the related HDMI input
source from the list. To terminate this operation and
control the TV via the remote again, press the Source
button, which will still be functional, on the remote and
switch to another source.
The TV remote is automatically able to control the
device once the connected HDMI source has been
selected. However not all buttons will be forwarded
English - 30 -
(**) Limited Models Only
Advertisement
Table of Contents
