Sony VCRplus+ SLV-775HF Operating Instructions Manual page 71

Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for VHF/UHF antenna, use the EAC-32
antenna connector (not supplieci) to
connect the antenna to the VCR.
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
1
2
3
Attaching a UHF/VHF band
mixer
When using both 75-ohm coaxial cable
and 300-ohm twin lead cable for VHF/
UHF antenna, use the EAC-66 UHF/
VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
t
75-ohm coaxial
cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
1 Loosen the screws on the mixer.
2
Wind the twin lead's around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
Additional Information
71