Table of Contents
Advertisement
- - - - - - - - - - - - C h i p Component Information
-
Installing a Replacement Chip
As the value of chip components is not indi-
cated on the body of the chip, be careful to get
the right part for replacement.
0 Apply a small amount of solder to the land on
one side where the chip is to be installed.
Avoid too much solder, which may cause
bridging (shorting to other parts).
0 Hold the chip with tweezers in the desired
position, and apply the soldering iron with a
motion line that is indicated by the arrow in
the line below. Do not apply heat for more
than 3 seconds.
0 Remove the tweezers and solder the electrode
on the other side
in
the manner just described.
---------------------------------------------------------------1-5
FT-2200 Technical Supplement
Advertisement
Table of Contents
