Introduction - Yaesu FT-2200 Technical Supplement

-------------------------------------Introduction
,-,.
The information in this manual is intended
to supplement the FT-2200 Operating Manual,
for servicing the transceiver. Specifications and
details of operation and options are provided
in the operating manual, and are not reprinted
herein. Therefore, the manual is not intended
to serve as an independent reference, but to be
used in conjunction with the information pro-
vided in the operating manual. The FT-2200 is
intended to be serviced only by qualified tech-
nicians.
Two PCB layout diagrams are provided for
each double-sided circuit board in the trans-
ceiver. Each side of the board is referred to by
the type of the majority of components in-
stalled on that side("leaded" or "chip-only").
In most cases one side has only chip compo-
nents, and the other has either a mixture of
both chip and leaded components (trimmers,
coils, electrolytic capacitors, ICs, etc.), or
leaded components only.
While we believe the technical information
in this manual is correct, Yaesu cannot assume
liability for any damage that may occur as a
result of typographical or other errors that may
be present. Your cooperation in pointing out
any inconsistencies in the technical informa-
tion would be appreciated.
The technical information on this manual
supersedes all previously published informa-
tion on this product. Where information is du-
plicated in this manual and the operating
manual, this manual should generally be con-
sidered more current.
Yaesu Musen reserves the right to make
changes in the circuitry of this transceiver, in
the interest of technological improvement,
without obligation to owners.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 - 1
FT-2200 Technical Supplement