Sony SLV-675HF Operating Instructions Manual page 39

Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT on the remote
commander to display "L" in the
display window.
• Press TAPE SPEED on the remote
commander to select the tape speed,
SP or ER
S
||
0 REC
2
3
4
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pau se.
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press || PAUSE.
Press • REC on this VCR and set it to recording pause.
To start editing, press the || PAUSE buttons on both VCRs at the same
time.
To stop
editing
Press the [] STOP buttons on both VCRs.
Note
* If you start recording fbllowing the procedure above, the VCR won't start recording
with the APC function. To record a tape with the APC function, press [] REC again
during recording pause in step 3 so that the VCR analyzes the tape. Then when you
start recording in step 4, press || PAUSE immediately after the APC indicator stops
flashing. If you press | | PAUSE befbre the APC indicator stops flashing, the APC
function is canceled.
Additional Operations 39
SONY SLV-675HF/676HF (E) 3-856-995-11 (1)