Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual page 72

Using the Tfmer
Menu
To select the Timer Menu
1 Press MENU.
2 Move the joystick ÷ or ÷ to
highlight the Timer icon and
press @.
To reset the Ciock or rimers
Press
RESET on the remote
control, when in the Timer
Menu, to reset to the factory defaults.
•_=:iUl=l.J,.-==,om===_p I
Selecting Timer
Op tio n s
_To go directlyto
programmingTimer1 or 2 in
step 1, pressQ insteadof
movingthe joystick*.
_To returnto the Timer
Menuafter programmingone
of the Timers, p ressQ when
the highlight is inthe channel
numberfield,
The Timer Menu includes the following options:
mlllL
Timel 1
Timer2
L
You can use the Timer to program the TV to turn on and
off and tune to a specific channel at two scheduled
viewing times.
Timer 1 and lilt er 2 are not available to be set until you set
the Current Time.
1
Move the joystick _ or 4; to highlight
TimerI or
Timer 2. To set the time, move the joystick ÷.
Move the joystick _ or ¢ to highlight one of the
following options, then press @.
Program Select to set the Timer by day, time,
duration, and channel.
Off Select to turn off the Timer. (Your previous
settings are saved.)
Move the joystick _ and _ to set the day(s), hour,
minute, duration, and channel number. Press @ or
÷ to confirm each setting and move to the next
setting. Move the joystick ÷ to go back to the
previous setting.
4 Press MENUto exit the Menu. An LED on the front
panel will light, indicating the timer has been set.
(day, hour, and minute). Press _ (or move the
joystick ÷) to confirm each setting and move to the
next setting. Move the joystick ÷ to go back to the
previous setting.
2 Press MENUto exit the Menu.
71