Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual page 32
Hide thumbs
Also See for FD Trinitron WEGA KV-32HS500:
- Operating instructions manual (91 pages) ,
- Instructions manual (12 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Notes on Using This Connection
Watch
the satellite
receiver
Press TV/VIDEO repeatedly
to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned
on and set to the satellite receiver input.
Watch the VCR
Press TV/VIDE 0 repeatedly
to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
If you have a non-Sony
VCR or satellite receiver, you must program
the
to operate
the satellite
remote control. See "Programming
the Remote Control"
on pages 43-44.
receiver or VCR
Activate the TV remote
For the satellite receiver, press SAT/CABI F :FUNCT/0[I For the VCR, set the A/V
control to operate
the satellite
slide switch to the position
you programmed
for the VCR. Then press
receiver or VCR
VCR/DVD FUNCTION.
Control satellite receiver and
See "Operating
a Satellite Receiver"
on page 58 and "Operating
a VCR" on
VCR functions
with the TV
page 58.
remote control
Label video inputs to easily
See the instructions
for setting up Video Labels on pages 72-73.
identify equipment
connected
to the TV
31
Advertisement
Table of Contents
