Table of Contents
Advertisement
• For
[ )TRV260/265:
if the lbllowing
problem
occurs, clean lhe
video heads for 10 seconds with the Sony
V8-25CLD
cleaning cassetle (optional).
Mosaic-pattern
noise appears on the
playback
picture or the screen is displayed
in blue.
Playback
pictures do not move.
Playback
piclures do not appear or the
sound breaks off.
[g*_l Dirty video head. Use a cleaning
cassette.]
appears on the screen during
recording.
LCD screen
• Do not add excessive pressure
oll the LCD
screen, as it may cause damage.
• if your camcorder
is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder,
the back of the
LCD screen may heat up. This is not a
malfunction.
To clean
the LCD screen
• if fingerprints
or dust make the LCD screen
dirly, it is recommended
you using the LCD
Cleaning
Kit (optional)
m clean it. When you
use the LCD Cleaning
Kit (optional),
do not
apply the cleaning liquid directly to the LCD
screen. Use cleaning paper moistened with the
liquid.
On handlingthe casing
• if the casing is soiled, clean the camcorder
body with a soft cloth lightly moistened
with
water, and then wipe the casing wid_ a dry soft
cloth.
• Avoid the following
to avoid damage to the
finish.
Using chemicals
such as thinner,
benzine,
alcohol, chemical
cloths, repellent
and
insecticide.
Handling with above substances
on your
hm_ds.
Leaving the casing in contact with rubber or
vinyl objects lbr a long period of time.
Aboutcare and storageof the lens
• Wipe the surface of the lens clean with a soft
cloth in the lbllowing
instances:
When there are fingerprints
on the lens
surface.
In hot or humid locations
When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated
location
subject to
liltle dirt or dust.
• To prevent molds periodically
clean the lens
as described
above.
it is recommended
you operate your camcorder
about once a month to keep it in an optimum
state for a long time.
To chargethe pre-installed button-type
battery
Your camcorder
has a pre-installed
button-type
battery to retain the dote, time, and other
settings even when the POWER
switch is set to
(CHG) OFF. The pre-installed
button-type
battery is always charged while you are using
your camcorder
but it will get discharged
gradually if you do not use your camcorder.
The
button-type
battery will be fully discharged
in
about 3 months if you do not use your
camcorder
at all. However,
even if the pre-
installed button-type
battery is not charged, the
camcorder
operation will not be affected as long
as you are not recording
the date.
Procedures
Connect your camcorder
to a wall outlet using
the supplied AC Adaptor, and leave it with the
POWER switch set to (CHG) OFF for more
than 24 hours.
m
o
m
3
o
Additional Information
87
Advertisement
Table of Contents
