Table of Contents
Advertisement
To connect a VTR
using the If terminal
Connect the aerial
output of the VTA to
the aerial terminal 17
of the TV.
We recommend that
you tune in the video
signal to programme
number »Q«. For
details see ~Preset
channels manually «
on page 9.
I} the picture or the
sound Is distorted
Move the VTR away
from the TV.
Note:
After having con-
nected all optional
equipment to the TV,
attach the supplied
cover onto the rear
panel (See illustration
at the right).
S video input (Y/C
Input)
Video signals may be
separated into Y
(luminance or bright-
ness) and C (chromi-
nance) signals. Sepa-
rating the Y and C
Connecting Optional Equipment
You can connect optional audio-video equipment to this TV such as VTRs, video disc players,
and stereo systems.
Selecting input with
PROGR +/- of num-
ber buttons
You can preset video
input sources to the
programme positions
so that you can select
them with PROGR
+/— of number but-
tons. For details, see
»Preset channels
manuaily« on page 9.
Selecting input and output
This section explains how to view the video input picture (of the video
source connected to your TV), and how to select the output
signal using direct access buttons or the menu system.
Selecting input
£1
Press € repeatedly to select the input source.
The symbol of the selected input source will appear,
To go back to the normal TV picture
Press ©.
Input'modes
Symbol
Input signat
61
Audio/video input through the -@ 1 connector
6
RGB input through the -@ 1 connector
02
Audio/video input through the: G+ 2/2 2 connector
a2
S video input through the G+ 2/-€9 2 or € 2 connector
03
Audio/video input through €) 3 and -© on the front
43
S$ video input through the €9 3 connectors on the frontv
{4-pin connector)
04.
Audlo/video input through the G+ 4/2 4 connector
4394
S$ video input through the G+ 4/-
4 or €3 4 connector
(4-pin connector)
You can also select the input mode using the P—.4 — © and -—/+ buttons on the TV.
In this case, first select © , and then press -/+ buttons
to select the input.
Selecting the output
The G+ 2/- 2 connector outputs the source input
from the other connectors.
Press G> repeatedly to select the output.
The symbol of the selected output source appears.
:
Output modes
signals prevents them
from interfering with
Symbol
G> 2/9 2 connector outputs
one another, and the-
tetore improves
pic-
ture quality (e ape:
1G
The audio/video signal from the -@ 1 connector
cially luminance).
2a
The audio/video signal from the G> 2/2 2 connector
win a8 Video Pea
Acceptable Input signal
Available output signal
2e
The audlo/S video signal trom the > 2/4 connector
lacks throught wich
1 Normal audio/video and RGB signal
Video/audio trom TV tuner
3G
The audio/video signal from the ©) 3 6 © 3 connectors
's@ separated
sig-
'
nals canbe input 3
(2] Normal audio/video and S video signat
Video/audio trom selected source
3e
The audio/S video signa! from the 9 3 ¢ © 3 connectors
directly.
Gl Norma! audio/video and $ video signai
No outputs
4G
The audio/video signal from the G+ 4/4 4 connector
When connecting a
G] Normal audio/video and S video signat
Video/audio displayed on TV screen
4e
The audio/S video signal from the G+ 4/-@ 4 connector
monaural VTR
(monitor out)
vo
The audio/video signal from the T aerial terminal
ented jack hae ah
(5) No inputs
S video/audio signal displayed on
the TV and VTR.
TV screen (monitor out)
© No inputs
Audio signal (variable)
Advertisement
Table of Contents
