Instrument And Control Functions; Immobilizer System - Yamaha TENERE 700 Owner's Manual

Immobilizer system

1 2
1. Code re-registering key (red dot)
2. Standard keys (black bow)
This vehicle is equipped with an immo-
bilizer system to help prevent theft by
re-registering codes in the standard
keys. This system consists of the fol-
lowing:
 a code re-registering key
 two standard keys
 a transponder (in each key)
 an immobilizer unit (on the vehicle)
 an ECU (on the vehicle)
 a system indicator light (page 4-6)
About the keys
EAU1097B
The code re-registering key is used to
register codes in each standard key.
Store the code re-registering key in a
safe place. Use a standard key for daily
operation.
When key replacement or re-register-
ing is necessary, bring the vehicle and
the code re-registering key along with
any remaining standard keys to a
Yamaha dealer to have them re-regis-
tered.
TIP
 Keep the standard keys as well as
keys of other immobilizer systems
away from the code re-registering
key.
 Keep other immobilizer system
keys away from the main switch
as they may cause signal interfer-
ence.
NOTICE
DO NOT LOSE THE CODE RE-REG-
ISTERING KEY! CONTACT YOUR
DEALER IMMEDIATELY IF IT IS
LOST! If the code re-registering key
is lost, the existing standard keys
4-1

Instrument and control functions

can still be used to start the vehicle.
However, registering a new stan-
dard key is impossible. If all keys
have been lost or damaged, the en-
tire immobilizer system must be re-
placed. Therefore, handle the keys
carefully.
 Do not submerse in water.
 Do not expose to high tempera-
tures.
 Do not place near magnets.
 Do not place near items that
transmit electrical signals.
 Do not handle roughly.
 Do not grind or alter.
 Do not disassemble.
 Do not put two keys of any im-
mobilizer system on the same
key ring.
ECA11823
4