Product Description; Operation - Royal Sovereign DFN-1012B Owner's Manual

PRODUCT DESCRIPTION

1
2
1. Loosen Guard Mounting Nut (#4) from the Motor (#6).
2. Position the Back Guard (#5) firmly to the Motor (#6) and then fasten by turning the Guard Mounting
Nut (#4) clockwise.
3. Place fan blade (#3) on and screw Blade Cap (#2) on the shaft by turning it counter clockwise.
4. Place the Front Guard (#1) with the position fixer provided at the rim of the guard. Fix the guard with
fan using the clips.
1. Plug the power supply cord into an electrical outlet.
2. Use the controls below to adjust customize air flow.
FAN SPEED: Press the Fan Speed /Off button to control the fan
speed (OFF, Low, Medium or High). (A)
OSCILLATION CONTROL: Control the fan oscillation by pushing
the knob Down/Up. (B)
Tilt: Adjust fan head angle to set direction of air flow. (C)
ASSEMBLY INSTRUCTIONS
5
3
7
4
6
9
10
11

OPERATION

1. Front Guard
2. Blade Cap
8
3. Fan Blade
4.Guard Mounting Nut
5. Back Guard
6. Motor Shaft
7. Motor /Motor Housing
8. Oscillation Knob
9. Stand
12
-4-
10. Fan Speed Switch
11. Base
12. Power Supply Cord
B
C
A