Product Description - Royal Sovereign PFN-1016B Owner's Manual

PRODUCT DESCRIPTION

4
2
3
16
1
1. Remove the Extension Pole (#13). Align the holes at the bottom of the base pole with the Round
Base (#15). Secure with the screws and tighten. (#14)
2. Remove/Loosen the Height Adjustment Knob (#12) from the Extension Pole (#13) by turning it
clockwise.
3. Extend the Inner Tube Extension Pole (#11). Tighten the height adjustment knob. (#12)
4. Remove/Loosen the Set Screw (#10) from the bottom of the fan assembly.
5. Place the fan assembly on the Inner Tube of the Extension Pole (#11) and then tighten the Set
Screw (#10) to secure it into position.
6. Unscrew the Mounting Nut (#4) located on the Motor Housing (#8) by turning it
counter-clockwise.
7. Place the Rear Grille (#5) on the motor housing. Place the Mounting Nut back on and tighten by
turning it clockwise.
8. Next, place the Fan Blade (#3) on the Motor Shaft. (#6)
9. Place the Blade Cap (#2) on and tighten by turning it counter-clockwise.
10. Remove the screw on the front guard and open the clamps on the front grille (#1) Align the front
grille with the back base screw. Tighten the screw on the front base and tighten the clamps.
11. Place the Cover (#18) on the Front Grille. (#1)
ASSEMBLY INSTRUCTIONS
7
1. Front Grille
6
8
2. Blade Cap
3. Fan Blade
5
9
4. Mounting Nut
10
5. Rear Grille
11
6. Motor Shaft
12
7. Oscillation Knob
13
8. Motor Housing
14
9. Speed Control
15
10. Set Screw /Fan Assembly
11. Inner Tube of Extension Pole
12. Height Adjustment Knob
13. Extension Pole
14. Base Screws x 4
15. Round Base
16. Cover
(0,1,2 3)
-4-