Table of Contents
Advertisement
Oven side light (Depending on model)
1. To remove the glass cover,
hold the lower end with
one hand, insert a flat
sharp implement such as
a table knife between the
glass and the frame.
2. Pop out the cover.
3. If necessary, replace the halogen bulb with a 25-40 watt,
300 °C heat resistant halogen oven light bulb.
Tip: Always use a dry cloth when handling a halogen
bulb to prevent sweat from fingers being deposited on
the bulb surface. It increases the life of the bulb when
you exchange the bulb.
4. Reattach the glass cover.
DOOR REMOVAL
For normal use, the oven door must not be removed but if removal is necessary, for example, for
cleaning purposes, follow these instructions.
CAUTION: The oven door is heavy.
1. Open the door and flip
open the clips at both
hinges completely.
NeoTwin_NV70H7786ES_TR_DG68-00522U-02_EN.indd 9
2
70
1
2. Close the door by
approximately 70 °. With
both hands, grasp the
sides of the oven door at its
middle and pull-lift until the
hinges can be taken out.
English - 9
3. After cleaning, for
attaching the door repeat
the 1 and 2 steps in
revers order. The clip
on the hinge should be
closed on both side.
2014-09-12
3:04:43
Advertisement
Table of Contents
