Whirlpool WHP1000S Pedestal Installation page 5

4. When the washer/dryer is level, use a
to securely tighten all four locknuts against the pedestal. The
locknuts must be tightened to prevent vibration.
locknut
5. Align front panel with pedestal and snap in place.
For washer/dryer models that are 38" (96.5 cm) high, the wide
edge should be placed on top.
For washer/dryer models that are 36" (91.4 cm) high, the wide
edge should be placed on bottom.
wide
38" (96.5 cm)
models
" open-end wrench
narrow
36" (91.4 cm)
models
5