Parts Replacement - Panasonic WM-S1E Service Manual

PARTS REPLACEMENT
Hi Microphone Unit Ass'y Removal
e Turn the microphone case ass'y counterclockwise and
remove the microphone case ass'y from the micro-
phone case end.
ePull the microphone unit ass''y and remove the insu-
lation plate from microphone unit lead wires. (Fig. 1
or Fig. 2)
[WM-S1E, WM-S2E, WM-S5E only]
Microphone cord ass'y
Microphone case end
Insulation plate —_()
Microphone unit assy
Microphone case ass'y
[WM-S10E only]
Microphone case assy
Microphone unit ass'y
Insulation plate CO
Microphone case end
eUnsolder lead wires from the microphone unit ass'y
and replace the microphone unit ass'y with a new
one. (Fig. 3)
Microphone unit ass'y
Black ( @) : GND)
Red ( @ : Hot)
Natural ( : Cold) atural ( @) () Fig. 3
@ Output Connector Removal
[WM-S1 E,WM-S5E]
Turning the fixing screw counterclockwise and re-
move the output connector from the connector case.
(Fig. 4)
Output connector
Fig. 4
Connector case
e Unsolder lead wires from the output connector. (Fig. 5)
Output connector
Yellow ( @ : Hot)
White ( @) : Cold)
Black ( @) : GND)
[WM-S2E, WM-S10E]
e Remove the belt clip fixing screws and remove the belt
clip from the battery case lid in the direction of the
arrow @) . (Fig. 6)
e Use a screwdriver and loosen the fixing screw in the
direction of the arrow @) . (Fig. 6)
e Remove the battery case lid in the direction of the
arrow @) . (Fig. 6)
Beit clip
fixing screw
(x2)
Fixing screw
Battery case lid
eTurning the fixing screw counterclockwise and re-
move the output connector from chassis.
Output connector
eUnsolder the lead wire from output connector show
in Fig. 5. :
ae ee
BERS
Ataantae Stine Ios sie seine