Replacement Of Microphone - Panasonic WM-S1E Service Manual

MICROPHONE SECTION SUPPORT
Microphone
Hollow
ee
ye ~~
Microphone
holder
CONNECTIONS
Press the relay connector in the direction of the
arrow until a snapping sound is heard.
Relay connector
Pre-amp section
XL-type connector
Line up the hollow and projecting portions and
attach.
Press the relay connector in the direction of the
arrow until a snapping sound is heard.
@Extract
"WS
ow @) Loosen
REPLACEMENT OF MICROPHONE HOLDER & FLEXIBLE BAR
e Replacement of Microphone Holder
1. Loosen the microphone holder fixing screw
(M2 X 3.5 tapping screw).
2. Hold the microphone holder and flexible
bar, twist and extract.
Relay connector
Pre-amp section
ee'
edo
XL-type connector
Sif ay
3. Loosen the microphone holder fixing screw
(M2 X 3.5 tapping screw) for the side to be
replaced.
4. Hold the microphone holder and flexible bar,
twist and insert.
5. Securely tighten the microphone holder fixing
screw (M2 X 3.5 tapping screw).
® Loosen
©® Tighten
aa.
@ Insert
+ aa went