To Set Up The Vertical Window - HP 54600A User's And Service Manual

~
The Oscilloscope at a Glance
To set up tile vertlcalwladow
'-.__;
"--'
~
To set up the vertical window
"--'
The following exercise guides you through the vertical keys, knobs, and
\ J
"--'
status line.
~
1
Center the signal on the display with the Position knob.
The Position knob moves the signal vertically, and it is calibrated.
v
Notice that as you turn the Position knob, a voltage value is displayed
for a short time indicating how far the ground reference is located from
"'-/
the center of the screen. Also notice that the ground symbol on the
right side of the display moves in conjunction with the Position knob.
,_:
~
"'-/
Measureaaeat lllats
"'-/
If the channel is de coupled, you can quickly measure the de component of the
signal
by
simply noting its distance from the ground symbol.
\,_/
,_.
If
the channel is ac coupled, the de component of the signal is removed allowing
'-../
you to use greater sensitivity to display the ac component of the signal.
"'-/
'-../
'-"
"--'
'-"
"'-/
v
'-._./
'-"
~
\-I
12
~