Electrical Connection; Warning - Whirlpool RY160LXT Installation Instructions Manual

Power Supply Cord

WARNING

Electrical Shock Hazard
Disconnect power before servicing.
Use a new 40 amp power supply cord.
Plug into a grounded outlet.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Disconnect power.
2. Use Phillips screwdriver to remove the terminal block cover
screw located on the back of the range. Pull cover down and
toward you to remove cover.
3. Remove plastic tag holding three 10-32 hex nuts from the
middle post of the terminal block.
4. Add strain relief.
Style 1: Power supply cord strain relief
■ Assemble a UL listed strain relief in the opening.
A. UL listed strain relief
6

Electrical Connection

A
Direct Wire
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge copper or 6 gauge aluminum wire.
Electrically ground range.
Failure to follow these instructions can result in death,
fire, or electrical shock.
■
Feed the power supply cord through the opening in the
cord/conduit plate on bottom of range. Allow enough
slack to easily attach the wiring to the terminal block.
■
Tighten strain relief screw against the power supply cord.
Style 2: Direct wire strain relief
■
Use Phillips screwdriver to remove screws from panel on
back of range.
USE USE
REMOVE REMOVE POWER POWER TAG! TAG! POWER CORD CORD A S CORD A
NUTS QUITE QUITE NUTS NUTS LA LAS WITH WITH LA WITH ETIQUET ETIQUET TUERCA AR ICO AR EL EL ICO
USE PARA CORDÓN CORDÓN PARA CONECT CONECT ELÉCTR ELÉCTR