Table of Contents
Advertisement
Installing a Power Supply
Switch Series
C9300X Series
Switches
Note
1. PWR-C1-1900WAC-P provides 1900 W output power when the nominal input voltage is 230 V. If the
For information on available PoE, PoE+, and Cisco UPOE/UPOE+ requirements, see these sections the
Supply Modules, on page
The 350 W and 715 W AC power supply modules are autoranging units that support input voltages from 100
through 240 VAC. The 1100W power supply module is an autoranging unit that supports input voltages from
115 through 240 VAC.
Each AC power supply module has a power cord for connection to an AC power outlet. To view the list of
available AC power cords, see
The following illustrations show the power supply modules.
Figure 46: 1100 W AC Power Supply
Supported Power Supply Modules
PWR-C1-350WAC-P
PWR-C1-715WAC-P
PWR-C1-1100WAC-P
PWR-C1-1900WAC-P
nominal input voltage is 115 V, then the output power is limited to 1500 W. See
Cords for PWR-C1-1900WAC-P, on page 119
For more information about power supplies, see
Fan, on page
116.
25.
AC Power Cord Specifications, on page
Description
350 W AC Platinum certified power supply
module
715 W AC Platinum certified power supply
module
1100 W AC Platinum certified power supply
module
1900 W AC Platinum certified power supply
module
for suitable power cord options.
Specifications for the Power Supplies, Switches, and
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
Power Supply Modules Overview
Table 47: AC Power
118.
Power
83
Advertisement
Table of Contents
