Cooktop Removal; If You Need Assistance - Whirlpool RC8700ED Installation Instructions Manual

Cooktop removal

If removing the cooktop is necessary for cleaning
or maintenance:
1. Disconnect electrical supply.
2. Disconnect vent duct system.
3. Lift cooktop out of countertop to complete
cleaning or maintenance.
Part No. 208040 A
4381589
© 1995
After cleaning and maintenance:
1. Reinstall cooktop in cutout.
2. Check that front edge of cooktop is parallel to
front edge of countertop.
3. Connect electrical supply.
4. Connect vent duct system.
Benton Harbor, Michigan 49022
If cooktop does not
operate:
Check that circuit breaker is not tripped or the
house fuse blown.
Check that wire connections are intact.
See Use and Care Guide for troubleshooting
list.

If you need assistance:

Check your Use and Care Guide for a toll-free
number to call, or call the dealer from whom you
purchased this appliance. The dealer is listed in
the Yellow Pages of your phone directory under
"Appliances — Household — Major — Service and
Repair."
When you call, you will need the cooktop model
number and serial number. Both numbers can be
found on the model/serial rating plate located on
the left side of the plenum.
Printed in U.S.A.