Adjustment Of The Remaining Moisture - Electrolux EDH9000W3 User Manual

8.2 Adjustment of the remaining moisture

Every time you enter in the "Adjustment of remaining laundry
moisture" mode, previously set degree of remaining moisture
will change into next value ( e.g previously set
into ).
To change the default degree of remaining moisture:
1. Press the on/off button to activate the appliance.
2. Use the programme knob to set any programme.
3. Wait approximately 8 seconds.
4. Press and hold buttons (G) and (F) at the same time.
One of these indicators comes on:
• maximum dryness
• more dry laundry
• standard dry laundry
5. Press and hold buttons (G) and (F) again until the indicator of the
correct level comes on.
If the display returns to the normal mode (the time of the
selected programme from step 2. will be displayed), while
setting the degree of remaining moisture, press and hold
buttons (G) and (F) once again to enter to the "Adjustment of
remaining laundry moisture" mode (previously set degree of
remaining moisture will change into next value).
6. To accept the selected degree of remaining moisture, wait 5 s
and the display returns to the normal mode.
Dryness level
maximum dryness
Display symbol
SETTINGS
will change
27/52