Table of Contents
Advertisement
UN
:all-
DET
Sapaq.
ue.
-.
w
The program sequencer is the function that allows
you to save the contents of real-time performance
and the progress of the lower keyboard chords by
step for later playback. This function also enables
you
to save
the
playing
while
listening
to the
performance
in memory
or to edit recording
by
step.
6.1
Record
The sequencers of SR2 are equipped with the three
independent tracks of UPPER, LOWER and PEDAL.
The contents recorded by the individual tracks are
as follows.
(1)
UPPER track
е ON-OFF switch and volume setting in each of
the following blocks:
UPPER
SYNTHESIZER,
UPPER
PRESET
IN-
STRUMENT,
UPPER
ORCHESTRA,
UPPER
TIBIA,
EFFECT
(UPP.SUS,
CHORUS,
TRE-
MOLO)
e Upper keyboard ON-OFF
(2)
LOWER track
:
e ON-OFF switch and volume setting in LOWER
TIBIA/ORCHESTRA block
.
e EFFECT (LOW. SUS.)
e ON-OFF
of RHYTHM,
FILL IN, INTRO/END-
ING, AUTO
MELODY
CHORD,
CONSTANT,
MEMORY and ONE FINGER (FILL IN, INTRO/
ENDING only in realtime recording)
e ON-OFF switch and volume setting in AUTO
PLAY ORCHESTRA block
e ON-OFF switch and volume setting in RHY-
THM block
|
е ОМ-ОЕЕ of TOUCH ВАК
е кач
of foot
switch
(realtime
recording
only
e Lower keyboard ON/OFF
(3)
PEDAL track
е ON-OFF switch and volume setting in PEDAL
TIBIA/ORCHESTRA block
e Pedal keyboard ON-OFF
Note:
It is impossible to store TOTAL VOLUME,
Expression
Pedal
setting,
TEMPO,
TRANSPOSE,
TUNE,
PRO-
GRAM REGISTRATION and ONE TWO PLAY.
Ш Real-time Record
This function allows you to record the playing of
upper lower and pedal keyboards in real time on
the three independent tracks.
(1) Select the track for recording
(Step 2 operation may be taken ahead of this
step.)
REST
ENO
Y
асаа
Turn
опе ог plural number
ої switches
of
UPPER, LOWER, and PEDAL on.
Note:
If the lamp blinks, the track is blank. If the lamp lights
up continuously, the track is already recorded. If you
want record on this track, erase the contents prior to
the recording. (Refer to page 17.)
(2) Turn the REAL TIME switch on.
(3) Set the registration for the track for recording.
(4) Depress START/END switch.
The display indication changes as shown
by
the figure. The Intro Pattern starts sounding
for two bars.
Note:
When the rhythm pattern does not sound, the metro-
nome
sounds. Adjust the volume of the metronome
and tempo
Advertisement
Table of Contents
