Channeladd/Delete; Rf Output Channel - Samsung DVD-VR335 Instruction Manual

Press the AT buttons to select Auto Channel A Press the AT buttons to setect Channel
Memory, then press the ENTER or _, button. _ Add/Delete, then press the ENTER or _, button.
• The DVD Recorder & VCR will automatically
search for all available channels in the setected
tuner band. This procedure may take a few
minutes to complete.
• When finished, the lowest channel will be dis-
played.
• If you want to stop or cancel scanning, press the
ENTER button. Then select 'YES'.
Use this feature if Auto Channel Memory missed a
channel that you would like to add or if you wish to
remove a channel.
With the unit in Stop mode/No Disc mode, press
the MENU button.
Press the AT buttons to select Setup, then press
the ENTER or D,-button.
5
Press the AT or number buttons to select the
channels you want to add or delete on the Select
channel screen. Then, press the ENTER button.
• Using CNfTRK (^/V) buttons for channel selection
allows the user to add/delete one channel at a time.
• Using AT buttons for channel selection jumps to
the next channel memorized in Auto Channel
Memory.
Press the _ _ buttons to select Add or Delete,
then press the ENTER button.
iiiiiii
ii!ii! !
iii!i'!ii_iiiiiii
iiiiiiiiiii
Press the A_" buttons to select Channel Set, then
press the ENTER or _ button.
When you connect the DVD Recorder & VCR to your
TV with the RF Antenna Cable, follow the steps below
to set the RF Output Channel.
With the unit in Stop mode/No Disc mode, press
the MENU button.
Press the ,_T buttons to select Setup, then press
the ENTER or _ button.
English - 35